Advertisement
• Do not reach under the scroll saw table when the motor
is running.
• Do not wear loose clothing or jewelry. Roll long sleeves
above the elbow. Tie back long hair.
7. To avoid injury from accidental starting of the scroll saw:
• Make sure the switch is OFF and unplug the power
cord from the electric outlet before changing the
blade,
adjustments.
• Make sure the switch is OFF before plugging in the
power cord to an electric outlet.
8. To avoid injury from a fire hazard, do not operate the
scroll saw near flammable liquids, vapors or gases.
9. To avoid back injury:
• Obtain help when it is necessary to raise the scroll saw
more than 10 inches. Bend your knees when lifting the
scroll saw.
• Carry the scroll saw by its base. Do not move the scroll
saw by pulling on the powercord. Pulling on the power
cord could cause damage to the insulation or the wire
connections resulting in electric shock or fire.
When operating the scroll saw
WARNING:
applications only. This product is not recommended for drilling
applications.
1. To avoid injury from unexpected scroll saw movement:
• Use the scroll saw on a firm level surface with adequate
space for handling and supporting the workpiece.
• Be sure the scroll saw cannot move when operated. Secure
the scroll saw to a workbench or table with wood screws or bolts
with washers and nuts.
2. Before moving the scroll saw, unplug the power cord from
the electrical outlet.
3. To avoid injury from kickback:
• Hold the workpiece firmly against the tabletop.
• Do not feed the workpiece too fast while cutting. Only feed
the workpiece at the rate the saw will cut.
performing
Use the rotary tool for sanding and grinding
maintenance
or
making
Advertisement
