Advertisement
the plug in any way. Do not use any adapter plugs. Check
with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded.
•
Double insulated tools are equipped with a polarized plug
(one blade is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still doesn't fit, contact
a qualified electrician to install a polarized outlet. Do not
change the plug in any way.
•
Avoid body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerators. There is an increase
risk of electric shock if your body is grounded.
•
When operating a power tool outside, use an outdoor
extension cord marked "W-A" or "W." These cords are
rated for outdoor use and reduce the risk of electric shock.
•
Extension Cord Use.
A. Use only 'Listed' extension cords. If used outdoors, they
must be marked "For Outdoor Use." Those cords having
3-prong grounding type plugs and mating receptacles are
to be used with grounded tools.
B. Replace damaged or worn cords immediately.
C. Check the name plate rating of your tool. Use of improper
size or gauge of extension cord may cause unsafe or
inefficient operation of your tool. Be sure your extension
cord is rated to allow sufficient current flow to the motor.
For the proper wire gauge for your tool, see chart.
CHART FOR MINIMUM WIRE SIZE OF EXTENSION CORD:
Nameplate AMPS
0-6
6-10
10-12
12-16
Be sure to check voltage requirements of the tool to your
2
18 AWG
18 AWG
16 AWG
14 AWG
If in doubt, use larger cord.
incoming power source.
CORD LENGTH
' 5
5
' 0
16
AWG
16
AWG
16
AWG
12
AWG
1
0
' 0
1
5
16
14
AWG
AWG
14
12
AWG
AWG
14
12
AWG
AWG
(NOT
RECOMMENDED)
' 0
Advertisement
