Advertisement
7. Use safety equipment. Eye protection should be worn at
all times when operating this machine. Use ANSI
approved safety glasses. Everyday eyeglasses only have
impact resistance lenses. They are NOT safety glasses.
A dust mask, respirator, non-skid safety shoes, a hard hat,
or hearing protection must be used in appropriate
conditions.
8. Wear the proper apparel. Loose clothing, gloves, neckties,
rings, bracelets, or other jewelry may present a potential
hazard when operating this machine. Please keep all
apparel clear of the machine.
9. Don't overreach. Keep proper footing and balance at all
times when operating this product.
10. Always disconnect the machine from the power source
before servicing or changing the accessories.
11. Check for damage. Check your tool regularly. If any part
of the tool is damaged it should be carefully inspected to
make sure it can perform its intended function correctly. If
in doubt, the part should be repaired. Refer all service to
a qualified service professional. Consult your dealer for
advice.
12. Keep away from flammables. Do not attempt to operate
this tool near flammables or combustibles. Failure to
comply may cause serious injury or death.
13. Always check to make sure that the switch is not
engaged before plugging in the power cord.
14. Keep your hands clear of the cutting edges, sharpening
surfaces and all moving parts.
15. Protect others in the work area from debris such as chips
and sparks. Provide barriers and shields as needed.
16. Use the right tool for the job. Do not use a tool or
attachment to do a job for which it was not intended. Do
not alter a tool.
17. Make sure the grinding wheel speed rating exceeds that
of the unit.
18. Use only authentic accessories. Using noncompliant
accessories may be hazardous. Be sure that all
accessories are properly installed and maintained.
19. Remove all adjusting keys and wrenches. Make a habit of
checking that the adjusting keys and wrenches are
removed from the tool before turning it on.
Advertisement
