Advertisement
ON/OFF switches and speed control knob (Fig. 20)
Always wait for the saw or rotary tool to come to a complete stop
before restarting.
1. To turn the saw or rotary
tool on, press the switch (1)
to the ON (I) position.
2. Turn the variable speed
knob (2) to adjust the
blade speed or rotary
speed to the desired
setting. Turning the control
knob clockwise increases
speed; turning it
counterclockwise reduces
speed.
3. To turn the saw or rotary tool off, press the switch (1) to
the OFF (O) position.
Note: A small lock may be placed between the power switch and
the plastic switch guard (3) to prevent accidental operation. It is
recommended to lock the saw when not in use.
WARNING:
turn the switch OFF and unplug the scroll saw before moving the
tool, replacing the blade, or making adjustments.
Freehand cutting (Fig. 21)
1. Lay out desired design, or secure design to the workpiece.
2. Raise the blade guard foot
(1) by loosening the height
adjustment knob (2).
3. Position the workpiece
against the blade and
place the blade guard foot
against the top surface of
the workpiece.
4. Secure the blade guard
foot (1) by tightening the
height adjustment knob (2).
5. Remove the workpiece
from the blade prior to turning the scroll saw ON.
To avoid injury from accidental start-ups, always
Fig. 20
2
1
3
2
Fig. 21
1
Advertisement
