Cornelius FRUTISTA VIPER 3 FLAVOR Installation Manual page 24

Hide thumbs Also See for FRUTISTA VIPER 3 FLAVOR:

Table of Contents

Viper Installation Manual

Step

To set all barrels in the system to the same duration setting, perform Steps 1 through 4 in Table 11. and then

press the ALL button at the bottom of the display while highlighting the duration setting you desire for all the

barrels. When the duration settings are complete, press the BACK button to save the settings and return to the

Select menu, shown in Figure 12.

Refer to the service manual for other controller functions and features.

Publication Number: 621360041TBINS

Table 11.

Action

Set CO2 Pulse valve

From the Setup screen (Figure 12.), select the

duration

Select barrel

Use the Up and Down arrows to highlight the

desired barrel.

Select duration field

Use Left and Right arrows to select duration

field

Set duration

Use the + or - buttons at the bottom of the dis-

play to set the desired duration.

Select barrel

Repeat Steps 2 through 4 for all barrels.

Procedure

Setup screen, shown in Figure 18.

- 20 -

Table of Contents

Frutista viper e 3 flavor