Cornelius FRUTISTA VIPER 3 FLAVOR Installation Manual page 18

Viper Installation Manual
Setting the Clock
Highlight the CLOCK SETUP field from the Select menu, shown in Figure 12. This displays the Clock Setup
menu, shown in Figure 13. To set the time, perform the procedure in Table 4.
Step
1
2
3
4
5
6
7
To set the date, perform the procedure in Table 5. and refer to Figure 13.
Step
1
2
3
4
5
6
7
Publication Number: 621360041TBINS
Action
Set clock time Use the up and down arrows on the right side of
the control panel to highlight the TIME display on
the screen.
Select hour field Use the left and right arrows to select the hour
field
Set correct hour Use the + or - buttons at the bottom of the display
to set the proper hour.
Select minute field Use the left and right arrows to select the minute
field.
Set correct minute Use the + or - buttons at the bottom of the display
to set the proper minute.
Select AM/PM field If the 12 hour clock option is selected, use the left
and right arrows to select the AM/PM field.
Set AM/PM Use the + button at the bottom of the display to
set the AM/PM setting, if using 12 hour format.
TIME:
CLOCK
DATE:
SETUP
12:51P
MAR 04
BACK CLOCK DST
Action
Set date Use the up and down arrows on the right side of
the control panel to highlight the DATE display on
the screen.
Select month field Use the left and right arrows to select the month
field
Set correct month Use the + or - buttons at the bottom of the display
to set the correct month.
Select day field Use the left and right arrows to select the day
field.
Set correct day Use the + or - buttons at the bottom of the display
to set the correct day.
Select year field Use the left and right arrows to select the year
field.
Set correct year Use the + or - buttons at the bottom of the display
to set the correct year.
Table 4.
Procedure
11:00 AM
01/01/00
- +
Figure 13.
Table 5.
Procedure
- 14 - © 2010-2016, Cornelius Inc.