Selecting Ais Mode - Furuno FA-170 Operator's Manual

2. INLAND AIS OPERATION
2.2

Selecting AIS Mode

The Inland AIS has two operating modes: Inland (inland waterways) and SOLAS (SO-
LAS compliant class A AIS transponder). Select desired mode as follows:
1. Press the NAV STATUS key to open the [NAV STATUS] menu.
NAV STATUS
NAV STATUS
DESTINATION
ETA ( UTC )
AIS MODE
DYNAMIC INFO RATE
2. Press
pop up window appears.
3. Select [SOLAS] or [INLAND] as appropriate then press the ENT/ACK key. The
AIS mode icon at the top of the screen changes to display the selected mode.
You are asked if you are sure to reboot the system. Select [YES] then press the ENT/
ACK key to reboot the unit.
Notes on Inland AIS operation
• IMO No. is transmitted with all zeros.
• The draught used in Inland AIS is "Inland draught".
2-2
VOYAGE SHIP'S INFO
: 12
:
KOBE
[ SOLAS LIST ]
[ INLAND LIST ]
:
10 / MAY 10 : 51
:
:
: CURSOR : SELECT
ENT
to select [AIS MODE] then press the ENT/ACK key. The mode selection
AIS MODE
SOLAS
INLAND
Inland mode active
SCALE
PWR-DRIVEN VESSEL PUSHING
AHEAD OR TOWING ALONGSIDE
SOLAS
AUTO
: TAB
SOLAS mode active