Managing The System; Setting System Date And Time; Adjusting For Daylight Saving Time; Running The Network Time Protocol - Promise Technology SMARTSTOR NS4300N Product Manual

SmartStor NS4300N Product Manual

Managing the System

This category includes the following topics:
• Setting System Date and Time (page 122)
• Adjusting for Daylight Saving Time (page 122)
• Running the Network Time Protocol (page 123)
• Viewing the Results of NTP Synchronization (page 123)
• Rebooting the SmartStor (page 124)
• Shutting Down the SmartStor (page 124)
• Restarting the SmartStor (page 125)
• Locating the SmartStor (page 125)
• Viewing System Information (page 125)
• Viewing Enclosure Information (page 126)

Setting System Date and Time

To set the date and time on the SmartStor:
1. In the Tree, click the + beside the System icon.
2. Click the Date / Time icon.
3. Click the Setup tab.
4. From the dropdown menus, choose the time and date values.
5. Click the OK button.
6. In the confirmation box, click the OK button.

Adjusting for Daylight Saving Time

To adjust the SmartStor's clock for daylight saving time:
1. In the Tree, click the + beside the System icon.
2. Click the Date / Time icon.
3. Click the Time Zone tab.
4. Check the Adjust clock for daylight saving changes box.
5. From the dropdown menu, choose the increment for daylight saving time in
your location.
6. Click the OK button.
7. In the confirmation box, click the OK button.
122