4.
Click the NAS Management icon.
5.
Click the Add Plugin button.
6.
Do one of the following actions:
•
Type the name of the plug-in file
•
Click the folder icon, navigate to the plug-in file, click it, then click the
Open button
7.
Click the OK button.
After a few moments, the plug-in is added.
Do not disconnect the power or shut down the SmartStor while the
plug-in installation is running!
8.
Click the Configure Plugin button.
The newly added plug-in appears in the list. Its Service Status is OFF.
9.
Click the plug-in to choose it.
Chapter 3: Connecting to the SmartStor
Warning
41