Viewing A List Of Plug-Ins; Viewing Plug-In Version Numbers - Promise Technology SMARTSTOR NS4300N Product Manual

SmartStor NS4300N Product Manual
3. Click the Add Plugin button.
4. Do one of the following actions:
• Type the name of the plug-in file
• Click the folder icon, navigate to the plug-in file, click it, then click the
Open button
5. Click the OK button.
After a few moments, the plug-in is added.
6. Click the Configure Plugin button.
The newly added plug-in appears in the list. Its Service Status is OFF.
7. Click the plug-in to choose it.
The plug-in's name turns red.
8. Click the Enable button.
After a moment, the Service Status changes to ON.
The plug-in is now installed SmartStor.

Viewing a List of Plug-ins

To view a list of installed plug-ins:
1. Go to the Main Window.
2. Click the NAS Management icon.
3. Click the Configuration Plugin button.
Currently installed plug-ins appear in the Configuration Plugin list.

Viewing Plug-in Version Numbers

To view plug-in version numbers:
1. Right-click the SmartNAVI icon in the application tray.
2. Choose About from the popup menu.
The About window appears. The About window includes a list of installed
plug-ins and their version numbers.
When you are done with the About window, click the Close button
Do not disconnect the power or shut down the SmartStor while the
plug-in installation is running!
Warning
78