Rebuilding The File System; Checking The Event Log In Pasm - Promise Technology SMARTSTOR NS4300N Product Manual

SmartStor NS4300N Product Manual
To view File System status:
1. Start PASM.
See "PASM in your Browser" on page 86.
Or see "PASM in SmartNAVI" on page 87.
2. In the Tree, click the + beside the RAID & File System icon.
3. Click the File System Management icon.
4. Look for the RAID Volume
If the RAID Volume icon is Critical
contains errors and you must rebuild the file system. See below.

Rebuilding the File System

To rebuild a File System:
1. In the Tree, click the + beside the RAID & File System icon.
2. Click the File System Management icon.
3. In the File System Status tab, click the RAID Volume Critical
display the Rebuild File System button.
4. Click the Rebuild File System button.
5. In the confirmation box, type yes into the field provided, then click the OK
button.

Checking the Event Log in PASM

To view the Event Log in PASM:
To check Enclosure status:
1. Start PASM.
See "PASM in your Browser" on page 86.
Or see "PASM in SmartNAVI" on page 87.
2. In the Tree, click the + beside the Management icon.
3. Click the Event Log icon.
The Event Log displays. See Figure 4.
When you rebuild a File System, you delete all the folders in the
RAID volume and all the data saved in the folders.
icon on the File System Status tab.
(has a yellow !), the file system
Caution
142
icon to