Connecting To Pasm; Browser Support; Finding The Smartstor's Ip Address; Chapter 6: Pasm - Promise Technology SMARTSTOR NS4300N Product Manual

Connecting to PASM

The Promise Advanced Storage Manager (PASM) software is factory-installed on
the SmartStor system. PASM runs in the browser on your PC. You can access
PASM:
• Directly in your browser. See page 16.
• From SmartNAVI. See page 17.

Browser Support

Choose one of the following browsers to use with PASM:
• Internet Explorer
• Mozilla
• Firefox

Finding the SmartStor's IP Address

To access the SmartStor in your browser, you must know the SmartStor's IP
address. Use SmartNAVI for this purpose.
1. Right-click the SmartNAVI icon in the Windows
application tray (lower right corner of the screen).
2. Choose Open SmartNAVI from the popup menu.
The SmartNAVI MSN window appears with the NAS
List displayed. The IP address of the SmartStor shown in the NAS List.
For more information about SmartNAVI, see "Chapter 5: SmartNAVI" on
page 51.
•
•
IP address of the SmartStor
detected on the network
15
Chapter 2: Installation and Setup
Netscape Navigator
Safari (Mac OS X)
SmartNAVI icon