Table of Contents
Advertisement
Assuming the T24-SA sends its data on Data Tag C675
Line1=<V1><0D>
V1Format=00.000
Timeout1=2000
ValueDataTag1=C675
PrintDataTag=C675
MinInterval=100
LineDelay=0
PrintOnError=1
SwitchMode=1
Summed LED Display From Dual Source
We want to put the summed Net data from a pair of T24-SAs onto a large LED display. We want the switch input
of the T24-SO to toggle between Gross and zeroed net mode. (The printed output will reflect whether the device
is in gross or zeroed net mode).
We will use the out of the box rate of 3 per second. The display only needs the ASCII data followed by a carriage
return.
Assuming the T24-SAs send data on Data Tag C675 and FF34
Parameter settings:
Line1=<NET><0D>
FormatSUM=00.000
ValueDataTag1=C675
ValueDataTag2=FF34
PrintTrigger=C675
MinInterval=100
LineDelay=0
PrintOnError=1
SwitchMode=1
Print Gross Sum of 2 Devices To Printer
We need to print the gross sum of 2 devices to a printer with each time the switch input is activated on the T24-
SO.
We need to display the value of each input as well as the gross sum.
The printer is not very fast so we can only send a line every 50mS. Also we do not want to print more often than
once every 30 seconds even if the switch is pressed.
We want the printed output to look like:
Mantracourt Electronics Ltd
Weigh Station #1
Input 1: xx.xxxx Kg
Input 2: xx.xxxx Kg
--------------------
Sum:
xx.xxxx Kg
For assistance call
0871 345672
Parameter settings:
Line1=Mantracourt Electronics Ltd<0D><0A>
Line2=Weigh Station #1<0D><0A>
Line3=<0D><0A>
Line4=Input 1:<V1> Kg<0D><0A>
Line5=Input 2:<V2> Kg<0D><0A>
Line6=---------------------<0D><0A>
Line7=Sum:
63
Mantracourt Electronics Limited T24 Technical Manual
<GRO>Kg<0D><0A>
Advertisement
Table of Contents
