Pair Response - Mantracourt T24-BSi Technical Manual

Pair Response

This packet will arrive at the base station if another device enters pair mode while the base station is waiting to
pair. Once this packet has arrived the base station will be free to talk to the device. It can also determine the
device ID and Default Data Tag if it needs this information.
Packet From ID
Type
14 00 00 00
Packet Type
This is 0x14 hex (20 decimal) and may have higher bits set which indicate Error, Low Battery and Broadcast.
From ID
This contains the ID of the device that paired.
Data Tag
This contains the default Data Tag of the paired device.
RSSI
This indicates the signal strength that this packet was received at. See RSSI & CV in Appendix A.
CV
This indicates correlation value which equates to the quality of the signal when this packet was received. See
RSSI & CV in Appendix A
NOTE: After configuration or calibration you should power cycle the paired device to return it to normal
operation.
Mantracourt Electronics Limited T24 Technical Manual
Data Tag RSSI CV
00 00 00 00
14