Verify Ospf Configuration And Operation - Cisco NCS 5500 Series Configuration Manuals

Verify OSPF Configuration and Operation

—
Step 7
log adjacency changes [ detail ] [ enable | disable ]
Example:
RP/0/RP0/CPU0:router(config-ospf-ar-if)# log adjacency changes detail
(Optional) Requests notification of neighbor changes.
• By default, this feature is enabled.
• The messages generated by neighbor changes are considered notifications, which are categorized as severity Level
5 in the logging console command. The logging console command controls which severity level of messages are
sent to the console. By default, all severity level messages are sent.
Step 8 commit
Enable OSPF: Example
OSPF areas must be explicitly configured, and interfaces configured under the area configuration
mode are explicitly bound to that area. In this example, interface 10.1.2.0/24 is bound to area 0 and
interface 10.1.3.0/24 is bound to area 1.
interface TenGigE 0/3/0/0
ip address 10.1.2.1 255.255.255.0
negotiation auto
!
interface TenGigE 0/3/0/1
ip address 10.1.3.1 255.255.255.0
negotiation auto
!
router ospf 1
router-id 10.2.3.4
area 0
interface TenGigE 0/3/0/0
!
area 1
interface TenGigE 0/3/0/1
!
!

Verify OSPF Configuration and Operation

This task explains how to verify the configuration and operation of OSPF.
SUMMARY STEPS
1.
2.
3.
4.
Routing Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.3.x
48
show { ospf | ospfv3 } [ process-name ]
show { ospf | ospfv3 } [ process-name ] border-routers [ router-id ]
show { ospf | ospfv3 } [ process-name ] database
show { ospf | ospfv3 } [ process-name ] [ area-id ] flood-list interface type interface-path-id
Implementing OSPF