Asr 5500 System Administration Guide, Staros Release 21.4 - Cisco ASR 5000 Series Administration Manual

Monitoring ASR 5500 Hardware Status
Table 8: Hardware Monitoring Commands
To do this:
View the Status of the Power System
View the status of the PFUs
View the power status of the individual chassis slots
View the Status of the Fan Trays
View the status of the fan trays, including current relative speeds and
temperatures.
Determine the Status of Installed Cards
View a listing of installed application cards
Perform a Hardware Inventory
View all cards installed in the chassis and their hardware revision,
part, serial, assembly, and fabrication numbers
View details of a specific card. Output contains same information as
output of both show hardware inventory and show hardware version
board
View Card Diagnostics
View boot, power and temperature diagnostics
View runtime, or real time, information
View the LED Status of All Installed Cards
Note Refer to the descriptions of card-level and system-level LEDs in the ASR 5500 Installation Guide for detailed information.
View the LED status for all installed cards
View Available Physical Ports
View ports that are available to the system
View detailed information for a specific port
View CPU Resource Information
View CPU resources
View CPU usage information
View Component Temperature Information
View current component temperatures
View maximum temperatures reached since last timestamp.

ASR 5500 System Administration Guide, StarOS Release 21.4

152
Enter this command:
show power chassis
show power all
show fans
show card table
show hardware inventory
show hardware card slot_number
show card diag slot_number
show card info slot_number
show leds all
show port table
show port info slot_number/port_number
show resources { cpu | session }
show cpu table; show cpu info
show temperature
show maximum-temperatures
Monitoring the System