Monitoring Asr 5500 Hardware Status - Cisco ASR 5000 Series Administration Manual

Monitoring the System
To do this:
View information about system components, storage devices and network
interfaces
View Card Information and Statistics
View diagnostics for all cards or for a card in a specific slot/port; (for VPC,
slot = VM)
View detailed information for all cards or a card in a specific slot/port (for
VPC, slot = VM)
View operating status for all cards or VMs
View the contents of the boot configuration (param.cfg) file
[VPC-DI]
View information about installed hardware and whether it is optimal or not
for a specific card or all cards in the system
[VPC-DI]
View monitored statistics about the VPC-DI network relative to a specific
card
[VPC-DI]
Important
Important

Monitoring ASR 5500 Hardware Status

Use the commands contained in this section to monitor the status of the hardware components in the chassis.
For output descriptions for most of the commands, refer to the Statistics and Counters Reference.
Important
The commands or keywords/variables that are available are dependent on platform type, product version,
and installed license(s).
Some commands have different outputs depending on the platform type.
The commands or keywords and variables are dependent on platform type, product version, and installed
license(s). Some commands produce different outputs, depending on the platform type.
Monitoring ASR 5500 Hardware Status
Enter this command:
show hardware
show card diag slot/port
show card info slot/port
show card table
show cloud configuration
show cloud hardware
show cloud monitor di-network
ASR 5500 System Administration Guide, StarOS Release 21.4
151