Scaling Of Bfd - Cisco ASR 5000 Series Administration Manual

Configuring BFD

Scaling of BFD

Configure an active BFD session using one of the above methods and use same BFD neighbor while configuring
the active interface. For additional information, see
on page
bfd-protocol
Apply the same BFD results to one or more passive interfaces.
Associating BGP Neighbors with the Context
config
context context_name
router bgp AS_number
Notes:
• Repeat the sequence to add neighbors.
Associating OSPF Neighbors with the Context
config
context context_name
router ospf
Notes:
• Repeat the sequence to add neighbors.
Associating BFD Neighbor Groups with the BFD Protocol
config
context context_name
bfd-protocol
ASR 5500 System Administration Guide, StarOS Release 21.4
290
290.
bfd nbr-group-name grp_name active-if-name if_name nexthop_address
bfd nbr-group-name grp_name passive-if-name if_name nexthop_address
bfd nbr-group-name grp_name passive-if-name if_name nexthop_address
neighbor neighbor_ip-address remote-as rem_AS_number
neighbor neighbor_ip-address ebgp-multihop max-hop max_hops
neighbor neighbor_ip-address update-source update-src_ip-address
neighbor neighbor_ip-address failover bfd [ multihop ]
neighbor neighbor_ip-address
bfd nbr-group-name grp_name active-if-name if_name nexthop_address
bfd nbr-group-name grp_name passive-if-name if_name nexthop_address
Associating BFD Neighbor Groups with the BFD Protocol,
Routing