Saving The Configuration - Cisco ASR 5000 Series Administration Manual

Staros release 21.4
Hide thumbs Also See for ASR 5000 Series:
Table of Contents

Advertisement

Viewing Routing Information
bfd linkagg-peer linkagg_group_id local-endpt-addr local-endpt_ipaddress remote-endpt-addr
remote_endpt_ipaddress interval tx_interval min_rx rx_interval multiplier multiplier_value [ slot
slot_number ]
no bfd linkagg-peer linkagg_group_id [ slot slot_number ]
end
Notes:
• linkagg_group_id specifies the LAG number as an integer from 1 through 255.
• local-endpt-addr local-endpt_ipaddress specifies the source address of the multihop BFD session in
• remote-endpt-addr remote-endpt_ipaddress specifies the remote address of the multihop BFD session
• interval tx_interval specifies the transmit interval of control packets in milliseconds as an integer from
• min_rx rx_interval specifies the receive interval of control packets in milliseconds as an integer from
• multiplier multiplier_value specifies the value used to compute hold-down time as an integer from 3
• slot slot_number for redundant active-standby link aggregation, this option specifies the card for which

Saving the Configuration

Save your configuration as described in the Verifying and Saving Your Configuration chapter.
Viewing Routing Information
To view routing information for the current context, run one of the following Exec mode commands;
• show ip route: Displays information for IPv4 routes in the current context.
• show ipv6 route: Displays information for ipv6 routes in the current context.
• show ip static-route: Displays information only for IPv4 static routes in the current contextospf.
• show ip ospf: Displays IPv4 OSPF process summary information in the current context.
• show ipv6 ospf: Displays IPv6 OSPFv3 process summary information in the current context.
• show ip bgp: Displays IPv4 BGP information.
This example shows sample output of the command, show ip route.
[local]
"*" indicates the Best or Used route.
Destination
*44.44.44.0/24
*192.168.82.0/24
*192.168.83.0/24
208.230.231.0/24
ASR 5500 System Administration Guide, StarOS Release 21.4
296
IPv4 or IPv6 notation.
in IPv4 or IPv6 notation.
50 through 10000.
50 through 10000.
through 50.
this configuration is intended.
host_name
show ip route
#
Nexthop
208.230.231.50
0.0.0.0
0.0.0.0
0.0.0.0
Protocol
Prec Cost Interface
static
1
0
local1
connected
0
0
connected
0
0
ospf
110
10
local1
Routing

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 5500

Table of Contents