Configuring Boot Network Delay Time - Cisco ASR 5000 Series Administration Manual

Staros release 21.4
Hide thumbs Also See for ASR 5000 Series:
Table of Contents

Advertisement

Software Management Operations
The next example uses static IP addresses for MIO/UMIO/MIO2 in slot 5, which can access the external network server
through a gateway whose IP address is 135.212.10.2.
host_name
[local]
gateway 135.212.10.2
Step 3
Save the configuration as described in the Verifying and Saving Your Configuration chapter.

Configuring Boot Network Delay Time

An optional delay period, in seconds, can be configured for systems booting from a network. The purpose of
this parameter is to allow time for external devices, such as switches, that use the Spanning Tree Protocol
(STP) to determine the network route to a specified IP address.
To configure a boot network delay, enter the following command from the Global Configuration mode prompt.
[local]
Where time is an integer from 1 to 300 seconds before attempting to contact the external network server. If
your network uses STP, a typical delay time of 30 seconds should suffice.
Important
Configuring a Boot Nameserver
To configure a boot nameserver address, enter the following command from the Global Configuration mode
prompt.
[local]
Where ip_address is the IP address of the DNS server entered in IPv4 dotted-decimal notation.
Important
Upgrading the Operating System Software
Identifying OS Release Version and Build Number
The operating system can be configured to provide services and perform pre-defined functions through
commands issued from the CLI.
The operating system software is delivered as a single binary file (.bin file extension) and is loaded as a single
instance for the entire system.
boot networkconfig static ip address mio5 192.168.206.101 netmask 255.255.255.0
(config)#
host_name
boot delay time
(config)#
Save your configuration as described in the Verifying and Saving Your Configuration chapter.
host_name
boot nameserver ip_address
(config)#
Save the configuration as described in the Verifying and Saving Your Configuration chapter.
Upgrading the Operating System Software
ASR 5500 System Administration Guide, StarOS Release 21.4
129

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 5500

Table of Contents