Netconf Protocol Configuration Mode - Cisco ASR 5000 Series Administration Manual

NETCONF and ConfD

NETCONF Protocol Configuration Mode

The NETCONF protocol is enabled via the Context Configuration mode server conf command. This command
is restricted to the local context only.
[local]
[local]
[local]
[local]
bulkstats
confd-user
do
end
exit
netconf
no
rest
The following keywords are optional:
• bulkstats
• confd-user
• netconf
• rest
To disable NETCONF protocol, run the no server confd command in Context Configuration mode.
For additional information, see the NETCONF Protocol Configuration Mode Commands chapter of the
Command Line Interface Reference.
bulkstats
This NETCONF Protocol Configuration mode command enables bulkstats collection and reporting via REST
interface. By default, this command is disabled.
The command syntax is: bulkstats.
During StarOS statistics gathering, bulk statistics are also stored in the CDB for later retrieval over REST
interface.
Use no bulkstats to disable populating ConfD with bulkstats operational data.
For additional information, see the NETCONF Protocol Configuration Mode Commands chapter of the
Command Line Interface Reference.
confd-user
This NETCONF Protocol Configuration mode command associates a username for all CLI operations via
NETCONF. The user will be authenticated with verifiable credentials. This username is used for CLI logging
purposes only.
The command syntax is: confd-user <username>, where <username> is an alphanumeric string of 1 to 144
characters.
host_name
configure
#
host_name
context local
(config)#
host_name server confd
(config-ctx)#
host_name
(config-confd)#
- Populate ConfD with bulkstats operational data
- Configures the default login user with full administrator rights
for the ConfD server.
- Spawns an exec mode command which displays
information to the administrator
- Exits configuration mode and returns to Exec Mode
- Exits current configuration mode, returning to previous mode
- Configure the netconf interface
- Enables/Disables the followed option
- Configure the rest interface
?
ASR 5500 System Administration Guide, StarOS Release 21.4
NETCONF Protocol Configuration Mode
413