Asr 5500 System Administration Guide, Staros Release 21.4 - Cisco ASR 5000 Series Administration Manual

Getting Started
Ques.
25
—
—
—
Do you want to view the configuration script created[yes/no]: y
config
system hostname
context local
administrator
interface mio1
ip route 0.0.0.0 0.0.0.0
ssh key
ssh key
ssh key
server sshd
subsystem sftp
#exit
no server telnetd
no server ftpd
#exit
port ethernet 5/1
bind interface mio1 local
no shutdown
#exit
end
Do you want to apply configuration script created[yes/no]:
Task
Enable FTP access to the system.
Review and/or modify the configuration of
previous prompts.
Review the configure script created by the
wizard based on your inputs.
Apply the configuration file to the system.
hostname
admin_name
ip_address subnet
ip address
#exit
gw_address
v1_key
v2_rsa_key
v2_dsa_key
Description/Notes
File Transfer Protocol (FTP) uses TCP port number
21 by default, if enabled.
Note: For maximum system security, do not enable
FTP.
Note: in release 20.0 and higher Trusted StarOS
builds, FTP is not supported.
1 Enter the number of the prompt to be modified.
2 Configure the parameter.
3 Optional. Repeat step 1 and step 2 to modify
additional settings.
4 Enter "done" when you have completed all
changes.
An example of a created script is displayed in the
example below. Variables are displayed in italics
(variable).
Once applied, the parameter configuration is
automatically saved to the system.cfg file stored in
MIO/UMIO/MIO2 flash memory.
passwd
password
mio1

ASR 5500 System Administration Guide, StarOS Release 21.4

The Quick Setup Wizard
21