System Log Types - Cisco ASR 5000 Series Administration Manual

System Log Types

Applicable Platform(s)
Feature Default
Related Changes in This Release:
Related Documentation
Revision History
Revision history details are not provided for features introduced before releases 21.2 and N5.5.
Note
Revision Details
Two new critical CLI event logs and two new SNMP Traps are added to provide
notifcation if an administrator disables logging entirely for an Event ID or Event ID
range, or changes the logging level below default logging level (error level). These
event logs and traps are enabled by default in this release, and cannot be disabled.
Refer to
No commands have been added or modified as a result of this feature.
The show snmp trap statistics command output was expanded to show details in
the event that logging events have been disabled or logging level has been changed
below the default (error) logging level.
First introduced.
System Log Types
There are five types of logs that can be configured and viewed on the system:
Important
ASR 5500 System Administration Guide, StarOS Release 21.4
166
Global Configuration Mode Filtering, on page 170
Not all Event Logs can be configured on all products. Configurability depends on the hardware platform
and licenses in use.
ASR 5500
VPC-SI
VPC-DI
Enabled
Not Applicable
• ASR 5500 System Administration Guide
• Command Line Interface Reference
• VPC-DI System Administration Guide
• VPC-SI System Administration Guide
for more information.
System Logs
Release
21.3
Pre 21.2