Table of Contents
Advertisement
10.1.3 CryptoCard
The CryptoCard function is used to encrypt recordings. The CryptoCard
function is described in Chapter 9.
Enable the CryptoCard function as follows:
Enter the General Settings menu and scroll through the menu until the
following display or continue from the previous paragraph by pressing NEXT:
General Settings
CryptoCard:
NEXT
Press CHANGE to enable or disable the CryptoCard function.
General Settings
CryptoCard:
NEXT
Only in case a CryptoCard is inserted the personal code of the card can be
set or changed.
Insert your CryptoCard and press NEXT to set the personal code of your
card. The display will show:
General Settings
Change Card Code
NEXT
Press CHANGE to change Card code.
The display will show:
General Settings
Card Code: ▓
STORE
First enter the original code of the card and press CONTINUE.
The display will show:
New Card Code: ▓
STORE
Manual FeaturePhone 175 © Vidicode 2005
58
Off
CHANGE BACK
On
CHANGE BACK
CHANGE BACK
CANCEL
CANCEL
Advertisement
Table of Contents
Need help?
Do you have a question about the Featurephone 175 and is the answer not in the manual?
Questions and answers