Table of Contents
Advertisement
The display will show:
Telephone Settings
Put on hold: Hook-Flash
NEXT
The two options are:
Hook-Flash or Earth-Flash
By default Hook-Flash is selected as it is the most common.
Your service provider or PABX supplier can advise on the required setting.
Other options:
NEXT to continue with the Flash time function.
BACK to leave Telephone Settings.
10.2.4 Flash time
The Flash time determines the duration of the flash time of the Put on hold
property.
Enter the Telephone Settings menu and scroll through the menu until the
display shows Flash time, or continue from the previous paragraph by
pressing NEXT:
Telephone Settings
Flash time:
NEXT - CHANGE + BACK
Press + or – to increase or decrease the value. Default setting of the Flash
time is 110 ms. If this value doesn't function properly your service provider or
PBX manufacturer can advise a proper setting.
Other options:
NEXT to continue with the Wait after dial function.
BACK to leave Telephone Settings.
10.2.5 Wait after dial
The Wait after dial is the time the FeaturePhone 175 waits to start recording
after the first number is dialed. Default the Wait after dial is set to 4.0
seconds. A shorter time may cause the FeaturePhone 175 to record the
Manual FeaturePhone 175 © Vidicode 2005
64
CHANGE BACK
110 ms
Advertisement
Table of Contents
