ZyXEL Communications SBG5500-A User Manual page 95

Figure 65 Static DHCP: Add/Edit
The following table describes the labels in this screen.
Table 25 Static DHCP: Add/Edit
LABEL DESCRIPTION
Static DHCP Configuration
Enable Select this to activate the rule.
Group Name Select the interface group name for which you want to configure static DHCP settings. See
Section 6.7 on page 98
Select Device Info If you select Manual Input, you can manually type in the MAC address and IP address of a
computer on your LAN. You can also choose the name of a computer from the drop list and
have the MAC Address and IP Address auto-detected.
MAC Address If you select Manual Input, enter the MAC address of a computer on your LAN.
IP Address If you select Manual Input, enter the IP address that you want to assign to the computer on
your LAN with the MAC address that you will also specify.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Chapter 6 LAN
for how to create a new interface group.
SBG5500 Series User's Guide
95