ZyXEL Communications SBG5500-A User Manual page 224

Table 101 Configuration > Log / Report > Log Settings > Edit (Remote)
LABEL
Selection
#
Log Category
Selection
OK
Cancel
Chapter 13 Log / Report
DESCRIPTION
Use the Selection drop-down list to change the log settings for all of the log
categories.
disable all logs (red X) - do not send the remote server logs for any log category.
enable normal logs (green check mark) - send the remote server log messages and
alerts for all log categories.
enable normal logs and debug logs (yellow check mark) - send the remote server
log messages, alerts, and debugging information for all log categories.
This field is a sequential value, and it is not associated with a specific address.
This field displays each category of messages. It is the same value used in the
Display and Category fields in the Log Viewer tab. The Default category includes
debugging messages generated by open source software.
Select what information you want to log from each Log Category (except All Logs;
see below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this
category
enable normal logs and debug logs (yellow check mark) - log regular information,
alerts, and debugging information from this category
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
SBG5500 Series User's Guide
224