ZyXEL Communications SBG5500-A User Manual page 229

Figure 162 Maintenance > Host Name List: Add
The following table describes the labels in this screen.
Table 105 Maintenance > Host Name List: Add
LABEL
Refer To
Member List
Get MAC Address From IP
Description
MAC Address
OK
Cancel
Chapter 16 Host Name List
DESCRIPTION
Select MAC Filter List if you want to select the devices that you added in the MAC
Filter List.
Select ARP Table to view the IPv4 or IPv6 devices that are connected to an SBG's
port,
Select Manual Type MAC to enter the MAC address of the host device manually.
You can also enter a device's IP address and click Get to obtain its MAC address.
Select a member device from the drop-down list.
Enter the IP address of a device connected to the SBG, click Get and the SBG will
automatically obtain the MAC address of the device with this IP address.
Enter a description for this host.
Enter the host's MAC address, This field is configured automatically if you enter the
device's IP address in the Get MAC Address From IP field and click Get.
Click OK to save your changes back to the SBG.
Click Cancel to exit this screen without saving.
SBG5500 Series User's Guide
229