The Ipsec Vpn Screen - ZyXEL Communications SBG5500-A User Manual

Table 68 Configuration > VPN > VPN Status
LABEL
Assigned IP
Public IP

10.5 The IPsec VPN Screen

Click Configuration > VPN > IPsec VPN to open the following screen.
Use Gateway Configuration to manage the SBG's VPN gateway policies. A VPN gateway specifies the
IPsec routers at either end of a VPN tunnel and the IKE SA settings (phase 1 settings). You can also
activate and deactivate each VPN gateway.
Use Connection Configuration to specify which IPsec VPN gateway an IPsec VPN connection policy
uses, which devices behind the IPsec routers can use the VPN tunnel, and the IPsec SA settings (phase 2
settings). You can also activate or deactivate and connect or disconnect each VPN connection (each
IPsec SA).
Figure 132 Configuration > VPN > IPsec VPN
Chapter 10 VPN
DESCRIPTION
This is the local point-to-point IP address assigned to the client.
This is the client's public IP address for this connection.
SBG5500 Series User's Guide
163