Table of Contents
Advertisement
Figure 71 VLAN / Interface Group: Add/Edit (Interface Group)
The following table describes the labels in this screen.
Table 30 VLAN / Interface Group > Add/Edit
LABEL
VLAN / Interface Group
Group Name
Mode
VLAN
Interface Group (To Bridge /
Bundle WAN Interfaces)
802.1p
802.1q
VLAN Port Membership
Chapter 6 LAN
DESCRIPTION
Enter the descriptive name of the VLAN or Interface Group. You can enter up to 65
characters. You can use numbers, letters, hyphens (-) and underscores(_). Spaces
are not allowed.
Click this check box to create a VLAN group.
Click this check box to create an interface group,
IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC layer
frame that contains bits to define class of service.
Select the IEEE 802.1p priority (from 0 to 7) to add to traffic the SBG sends through
tagged member ports of this group. The greater the number, the higher the priority
level.
Type the VLAN ID number (from 1 to 4094) for traffic through tagged member ports
of this group. A VLAN ID cannot be assigned to more than one group.
SBG5500 Series User's Guide
100
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
