Setup > Time - Gamatronic Centric 3x480 Vac User Manual

7.2.8 Setup > TIME
This menu includes those features related to time.
7.2.8.1 SETUP > TIME > ADJUST DATE / TIME
Modify any or all of the fields as required: year, month, day, hours, minutes, seconds.
Click "Confirm" to apply the data.
7.2.8.2 SETUP > TIME > CHANGE TIME ZONE
Use this function to set the UPS to the proper time zone.
7.2.8.3 SETUP > TIME > SET LAST MAINTENANCE DATE
This function allows you to keep a record of when the last maintenance performed on the Centric. The
system password is required to change the last maintenance date.
7.2.9 Setup > ASSIGN SITE ID
This function enables descriptive text to be associated with the unit. When the Centric is connected to a
computer network, this information can be seen by someone who is monitoring the UPSs via an SNMP
program. This information is not seen or used by the network manager.
(For ID information seen by the network manager, see section 7.2.7.7 "Controller host name").
For the authorization level of User, the descriptors are shown in Figure 51. Click on a field to display the
virtual keyboard which you can use to enter the descriptive information.
CENTRIC 3x480, User Guide, rel. 1.7
G E
AMATRONIC LECTRONIC
Figure 50: "Setup > Time" options
Figure 51: Assigning a site ID
I L .
NDUSTRIES TD
69