5.
C
ENTRIC CONTROL SYSTEM
The Centric control system provides the user complete control over the UPS and its operating parameters.
This chapter describes basic, most frequently-used functions.
5.1
The main screen (main menu)
The main menu is the user's starting point for most operations. Figure 7 illustrates the main screen and
Table 4 explains the main screen's features.
I
D
TEM
ESCRIPTION
The operational status (ON/OFF) and current mode
1
(Normal [inverter] mode / bypass mode / battery mode)
2
Menu options: pressing these icons provide access to the main submenus.
3
Current date and time.
UPS soft on/off button: Pressing this icon displays the UPS ON/OFF screen, which
4
enables the user to turn the UPS on and off.
Alarm indicator (see Table 10):
•
When there is one or more active alarms of "error" status (the most serious status),
a red circle with a white "x" inside is displayed.
•
When there is one or more active alarms of "warning" status (and no alarms of
"error" status), a yellow triangle with an exclamation point inside is displayed.
5
•
When there are informational messages but no messages of "error" or "warning"
status, an "I" in a blue circle is displayed
•
When there are no active alarms or informational messages, this area of the main
screen is blank. Pressing this icon displays the Active Alarm screen.
Battery indicator: Indicates the status of the battery: charging or discharging.
6
Pressing on this icon displays the Battery Status screen.
Load indicators: Indicates the approximate load level on each output phase. With no
7, 8, 9
load, all the vertical bars are white. As load increases, the vertical bars change color,
from left to right.
14
G
E
AMATRONIC
LECTRONIC
Figure 7: The main screen and its features
Table 4: Features of the main screen
I
L
.
NDUSTRIES
TD
CENTRIC 3x480, User Guide, rel. 1.7