Ipv6 Ping Test - ZyXEL Communications GS1900 Series User Manual

33.7.3 IPv6 Ping T e st
Click
Ma inte na nc e
screen to ping an IPv6 server.
Fig ure 245
The following table describes the labels in
Table 192 Maintenance > Diagnostics > PING > IPv6
L ABEL

IPv6 Ping Test

IPv6 Address
Count
Interval
Size
Apply
Cancel
Follow the steps to perform a ping test.
1. In
IPv6 Addre ss
2. In
C o unt
3. In
Inte rva l
4. In , enter the packet size in bytes.
Size
5. Click
Apply
OR
Chapter 33 Maintenance
> >
Dia g no stic s PING
Maintenance > Diagnostics > PING > IPv6
DESC RIPT IO N
Enter the address of the target host server.
Enter the number of ping packets to send. The range is
Enter the time in seconds between sending ping packets. The range is
default is second.
1
Enter the individual packet size in bytes. The range is
Click to save the changes.
Apply
Click to discard the changes.
C a nc e l
, enter the IPv6 address.
, enter the number of ping packets.
, enter the time interval in seconds.
to perform the ping test.
GS1900 Series User's Guide
> in the navigation panel to open this screen. Use this
IPv6
.
IPv6 Ping T e st
240
to packets; the default count is
1 5
to seconds; the
1 5
to bytes; the default is
8 5120
.
4
bytes.
56