Modules
20
Thread take-up counter weight removal
1. Remove the 2 screws 1, and thread take-up counter weight 1, thrust
washer, unit shaft 2 and thrust washer.
2. Remove the retaining ring E6 from the unit shaft 2.
21
Presser bar removal
1. Remove the screw 1 from the presser bar clamp assembly 1, and then
pull the presser bar downward.
2. Remove the presser bar clamp assembly 1 and spring
3. Remove the screw 2, and then remove the plate spring 2 and the presser
bar bushing 3.
2 - 42
Needle-presser module
S07
1
.
1
Retaining ring E6
1
1
S07
1
2
2
3
2