Presser Foot Lifter Removal - Brother PE770 Service Manual

Modules
18

Presser foot lifter removal

1. Remove the retaining ring E4.
2. Remove the presser foot lifter 1 and the 2 washer 2.
3. Remove the presser lift shaft 3 and remove the retaining ring E4.
4. Remove the thread releaser assy 4.
19
Thread take-up assy. removal
1. Remove the screw 1, and detach the thread take-up lever assy 1.
NOTE •The screw 1 is reverse threaded.
2. Remove the 2 screws 2, and detach the needle bar crank rod assy 2.
Needle-presser module
Retaining ring E4
1
2 x 2
Retaining ring E4
1 1
2
3
2
2 - 41