X Driving Gear Pulley Attachment - Brother PE770 Service Manual

Embroidery
13

X driving gear pulley attachment

1. Apply a bead of EPNOC AP (N)0 to the shaft 1 of the main frame
subassembly.
2. Set the washer 2 and the X driving gear pulley 3 onto the shaft 1, and
then attach the retaining ring (E4).
Apply EPNOC AP (N)0 to the shaft of the main frame
subassembly.
14
X tension pulley ASSY assembly
1. Set the tension pulley 3 onto the shaft 2 of the X tension pulley assembly
1, and then attach the retaining ring (E4).
Embroidery parts
bead
XC8387***
Retaining ring E4
2 1
3
Retaining ring E4
1
3 2
3 - 71