Brother PE770 Service Manual page 28

Main unit
18
Rear cover removal
1. Remove the screw 1.
2. Lower the presser lever 1, and then remove section 2, being careful to
prevent the presser lever 1 being caught in section 2.
3. Remove section 3, being careful to prevent the switch 4 of the power
supply unit being caught in section 3.
4. Remove the hook 5, and then remove the rear cover.
19
Handle removal
1. Remove the 2 screws 1, and remove the handle 1.
2. Remove the 2 retaining rings E4 from the handle shafts, and remove the
handle 1, the 2 handle shafts and the 2 polyester sliders from the handle
holder.
Main parts
5 1 2 1
3
1 1
1
Retaining rings E4
4
2 - 11