Touch Panel Assembly Attachment - Brother PE770 Service Manual

Main unit
8

Touch panel assembly attachment

1. Attach the touch panel assembly 1 to the front cover.
9
Main PCB holder assembly attachment
1. Attach the light plate assembly 1 to the main PCB holder 2 using the 2
hooks 3 on the main PCB holder 2.
2. Attach the main PCB holder assembly 4 to the front cover with the 8
screws 1.
*Key point
• Hang the main PCB holder assembly 4 over the 2 hooks 5 at
the upper section of the front cover.
• Check that the lead wire of the light plate assembly 1 passes
under the left upper guide 6 of the main PCB holder
assembly 4.
1
Main parts
Taptite, Bind B
M3X8
0.39 — 0.79 N·m
1
6
Torque
1
1
3
2
5
4 1
3 - 33