Receiving A Telephone Call; Receiving An Intercom Call; Ending A Call; Adjusting Handset Receiver (Earpiece) Voice Volume - EnGenius FreeStyl SIP User Manual

3.
Use or key to scroll through the last 10 phone
numbers dialed. Select and press
selected number.
Note: Intercom numbers (Handset ID) are not stored in the
last 10 numbers dialed log.

Receiving a Telephone Call

1. When an incoming call arrives, the LCD will show the
Caller ID message, and the ringer will ring or vibrate unless
the ringer has been turned off.
2. If the handset is on the charger cradle (ringer will be
temporarily switched to "Ring" if it has been set to
"Vibrate"), lift the handset and press
conversation.
Re: You can turn on the "Any Key Talk" from MENU-5-2.
Notes:
1. You can press SILENT (Left) soft key if you choose to ignore the call.
Unlike turning off the ringer (from the handset menu), the
key operation is valid only for the current call.
2. If Caller ID service is available, the LCD will display the incoming call
information. If the LCD shows "Private" or "Unknown," the caller or
the originating phone company may have blocked the caller's
information.

Receiving an Intercom Call

1. When an intercom call arrives (called from other
handsets, ex. Handset 12), the ringer will ring or vibrate
unless the ringer has been turned off. Press
answer the intercom call.
2. If the handset is on the charger cradle (ringer will be
temporarily switched to "Ring" if it has been set to
key to dial the
key to start a
SILENT
to
~35~
"Vibrate"), lift the handset and press
conversation.
3. If the handset is not on the cradle and MENU-5-2 "Any Key Talk" setting is "On,"
press any key (except and the
Notes:
1. The LCD displays the caller's Handset ID.
2. You can press the SILENT (Left) soft key if you choose to ignore the call.
Unlike turning off the ringer the
the current call.

Ending a Call

To end a telephone or intercom call, press
cradle.

Adjusting Handset Receiver (Earpiece) Voice Volume

1. Voice volume can only be adjusted during a call.
2. There are 6 levels of volume selections. Use
key to adjust.
3. The new setting will remain effective for all future calls
until changed.

Adjusting Handset Speakerphone Voice Volume

1. Voice volume can only be adjusted during a call (in
speakerphone mode).
2. There are 6 levels of volume selections. Use
key to adjust.
3. The new setting will remain effective for all future calls
until changed.
key to start a
SILENT soft key) to answer.
SILENT key operation is valid only for
key, or place handset into charger
or
or
~36~