Charger Illustration - EnGenius SN933 User Manual

Charger Illustration

DC in
Handset charging slot
~23~
Charger Features
1. DC In
Connects to Charger AC Adaptor.
2. Handset Charging Slot
a. Charge handset battery when handset is placed in cradle.
b. Refer to the handset LCD for charging status
(1) Charging: battery status bar is running and the LCD screen will show :
"Charging".
(2) Fully Charged: battery status bar stands still and the LCD screen will
display "Charge Complete"
(3) Charge Fail: If there are any errors during charging mode, the LCD
screen will display "Charge Fail"
3. It is impossible to overcharge the battery using this charger.
4. The adaptor for the charging station can be used as travel charger as well.
However, you can't turn off the power while you charge the handset via travel
charger. A warning message" "Unplug Travel Charger then OFF" will be shown
on the LCD.
Notes:
1. Fully charge battery packs before first use.
Handset will "power on" automatically when placed in the
2.
charging slot.
However if you fully drain the battery, it will take around one
3.
minute for the handset to auto power on.
~24~