Processor Interaction With The Output Jacks - Dynatronics dynatron solaris 709 plus Service Manual

ProCessor InTeraCTIon

Processor Interaction with the Output Jacks

The processor board controls the proper channeling of the output signals to the output jacks. The processor also activates and
monitors the relay that allows output from the unit.
Processor Control of Output Waveforms
The output waveforms are generated by a Digital Signal Processor on command from the main processor. Since the signals
are digitally created, the accuracy of the waveform is derived from the crystal clock of the processor, whose accuracy is
typically .001% or better. Both the output intensity as well as the frequency are digitally controlled through communication
between the main processor and the Digital Signal processors.
DYNATRON SOLARIS PLUS SERIES | SERVICE MANUAL REV. 6 | AUGUST 29, 2017 119
®