Method 2: Using S-Bracket Connectors - VIA Technologies VT8237R Manual

12

Method 2: Using S-BRACKET connectors:

S-Bracket (The S-Bracket is showed in page 25) is an optional accessory.
It gives access to analog and digital audio output by integrating both SPDIF
and analog LINE OUT connectors. To use the S-Bracket, you should select
correct setting in the software utility. For information about the setting, refer
to selecting 4- or 6- Channel Setting later in the section.
Connector configurations for 4- and 6- channel using S-Bracket are
described below:
4-Channel Analog Audio Output
Back Panel
(Front channels)
SPDIF jack (coaxial)
1
2 Rear Speaker Out
No function
3
Description:
Connect two speakers to back panel's Line Out connector and two
speakers to one Line Out connector of S-Bracket. If you want to use
Line In function, please click the Rear Speaker Out button (showed
as below)
Technical Reference Booklet
S-Bracket
+
1
2 3