Create Disk Array - VIA Technologies VT8237R Manual

40

Create Disk Array

1. Use the arrow keys to navigate the main menu. Use the up and down arrow keys to
select the Create Array command and press <Enter> to call out the list of creation
steps.
Auto Setup For Data Security
8
8 Array Mode RAID 1 (Mirroring)
8 Select Disk Drives
8 Start Create Process
Channel
Channel0 Master
Channel1 Master
2. Highlight the Array Mode and press <Enter>, then a list of array modes will appear.
Just highlight the target array mode that you want to create, and press <Enter> to
confirm the selection.
RAID 0 for performance
8
RAID 1 for data protection
8
8 RAID SPAN for capacity
Channel
Channel0 Master
Channel1 Master
Technical Reference Booklet
VIA Tech. RAID BIOS Ver 1.00
Drive Name
IC35L040AVVA07-0
IC35L040AVVA07-0
VIA Tech. RAID BIOS Ver 1.00
Drive Name
IC35L040AVVA07-0
IC35L040AVVA07-0
Create a RAID array with
the hard disks attached to
VIA IDE controller
F1 : View Array/disk Status
: Move to next item
Enter : Confirm the selection
ESC : Exit
Array Name Mode
ATA 100 38.34
ATA 100 38.34
Create a RAID array with
the hard disks attached to
VIA IDE controller
F1 : View Array/disk Status
: Move to next item
Enter : Confirm the selection
ESC : Exit
Array Name Mode
ATA 100 38.34
ATA 100 38.34
Size(GB) Status
Hdd
Hdd
Size(GB) Status
Hdd
Hdd