Duplicate Critical Raid 1 Array - VIA Technologies VT8237R Manual

8 Create Array
8 Delete Array
8 Create/Delete Spare
8 Select Boot Array
8 Serial Number View
Channel
[*] Channel0 Master
[*] Channel1 Master IC35L040AVVA07-0 ARRAY 0 ATA 100 38.34

Duplicate Critical RAID 1 Array

When booting up the system, BIOS will detect if the RAID 1 array has any inconsistencies
between user data and backup data. If BIOS detects any inconsistencies, the status
of the disk array will be marked as critical, and BIOS will prompt the user to duplicate
the RAID 1 in order to ensure the backup data consistency with the user data.
Critical RAID 1
Duplicate now
Continue to boot
Remaining members of the failed array
Channel
Channel1 Device0
Channel0 Device0
Note:
1)Press <ESC> to Exit.
2)After Execute,Press <TAB> immediately can into Utility Window!
If user selects Continue to boot, it will enable duplicating the array after booting into OS.
VIA Tech. RAID BIOS Ver 1.00
Drive Name
IC35L040AVVA07-0 ARRAY 0 ATA 100 38.34
Drive Name
IC35L040AVVA07-0
IC35L040AVVA07-0
Sct/Clear bootable array
F1 : View Array/disk Status
: Move to next item
Enter : Confirm the selection
ESC : Exit
Array Name Mode
Critical Status
the RAID 1 array needs to
be duplicated to ensure
data consistancy.
Fault Hdd Found:
Channel 1 Device 0 Fault
Array Name Mode
Array0 ATA 100 38.34
Array0 ATA 100 38.34
43
Size(GB) Status
Boot
Boot
Size(GB) Status
Mirror
Source