Audio Configuration - VIA Technologies VT8237R Manual

10
ALC650/655 support 6 channel output,after installing the audio driver,
you can select 4/6 channel surround audio output in software utility and then
connect surround speakers to appropriate audio ports.
There are two ways to obtain 4/6 channel surround audio output:
1. 4/6 surround audio output of back panel only. All surround speaker
connect to audio connector.
2. S-Bracket (optional cable). You have installed S-Bracket into the
computer, and then connect two front speakers to back panel's
"Line-out" port, and the rest of speakers to S-Bracket. Detail connection
is refer to Page 25.
Method 1: 4/6 Surround audio output of back panel only.
After installing the audio drivers, you can attach the speakers for 2-/4-/6-
channel audio output. Always connect the speakers to the LINE OUT
connectors. Different connector configurations for 2-/4-/6-channel
operations are listed below:
2-Channel
In 2-channel configuration,
Line Out, Line In and MIC
functions all exist.
Technical Reference Booklet

Audio Configuration

Speaker Configuration
4-Channel
When set to 4-channel
configuration, Line In
is replaced by Rear
Speaker Out. Line in
function does not exist.
6-Channel
When set to 6-channel
configuration, Line In
is replaced by Rear
Speaker Out. Mic is
replaced by Center/
Subwoofer Speaker Out.
Line in and Mic do not
exist function.