Motherboard Layout
The following diagrams show the relative positions of the jumpers, connectors, major
components and memory banks on the motherboard.
# The LAN Connector is optional.
# The ALC650/ALC655 embeds an internal analog switch (by driver software)
to share LINE input with Surround output, and share MIC input with CENTER/
LFE output.
NOTE
1)
Be sure to check the cable orientation in order to match the colored strip to the pin
1 end of the connector.
2)
Be sure to connect PW1 and PWR1 to power supply correctly, otherwise, the mother
-board can't work normally.
3)
When you start up the system, please wait for 5 seconds after you power on AC.
4)
It is not recommended to add a metal spacer plate on the back of the Socket775.
Otherwise, some components will be short and damaged.
LGA775 Socket
7