Rebuild Broken Raid 1 Array - VIA Technologies VT8237R Manual

44

Rebuild Broken RAID 1 Array

When booting up the system, BIOS will detect if any member disk drives of RAID has
failed or is absent. If BIOS detects any disk drive failures or missing disk drives, the
status of the array will be marked as broken.
If BIOS detects a broken RAID 1 array but there is a spare hard drive available for
rebuilding the broken array, the spare hard drive will automatically become the mirroring
drive. BIOS will show a main interface just like a duplicated RAID 1. Selecting Continue
to boot enables the user to duplicate the array after booting into operating system.
Broken RAID 1
Power off and check the failed drive
Destroy the Mirroring Relationship
Choose replacement drive and rebuild
Continue to boot
Remaining members of the failed array
Channel
Channel0 Device0
Note:
1)Press <ESC> to Exit.
2)After Execute,Press <TAB> immediately can into Utility Window!
Technical Reference Booklet
Drive Name
IC35L040AVVA07-0
Critical Status
A disk member of a mirroring
array has failed or is not
responding.The array is
stilling functional,but fault
tolerance is disabled.
Array Name Mode
Array0 ATA 100
Size(GB) Status
38.34 Broken