Finding Feature Information - Cisco WLC 5700 Series Interface Configuration Manual

Configuring Multiple AP Manager Interfaces
This module lists the following sections:
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. Use Cisco Feature
Navigator to find information about platform support and Cisco software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
Pre-requisites For Configuring AP Manager Interfaces
You must ensure that you have a separate dynamic AP-manager interface per controller port before configuring
the controller's AP manager interfaces.
Restrictions for Configuring Multiple AP Manager Interfaces
The following restrictions apply while configuring the multiple AP manager interfaces in the controller:
• You must assign an AP-manager interface to each port on the controller.
OL-32314-01
Finding Feature Information, page 59
Pre-requisites For Configuring AP Manager Interfaces, page 59
Restrictions for Configuring Multiple AP Manager Interfaces, page 59
Information About Multiple AP-Manager Interfaces, page 60
Configuring Multiple AP Manager Interfaces, page 60
Feature History and Information For Configuring Multiple AP Manager Interfaces, page 61
Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
7
C H A P T E R
59