Wireless-g broadband router with 2 phone ports and built-in analog telephone adapter (128 pages)
Summary of Contents for Cisco WLC 5700 Series
Page 1
Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) First Published: 0, Last Modified: 0, Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
Page 2
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
Page 3
Accessing the CLI Through a Console Connection or Through Telnet Using the Web Graphical User Interface C H A P T E R 2 Prerequisites for Using the Web GUI Information About Using The Web GUI Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 4
Configuring a Range of Interfaces: Examples Configuring and Using Interface Range Macros: Examples Configuring Interfaces Configuring Layer 3 Interfaces Shutting Down and Restarting the Interface Monitoring Interface Characteristics Monitoring Interface Status Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 5
Feature History and Information For Configuring Dynamic Interfaces Configuring Multiple AP Manager Interfaces C H A P T E R 7 Finding Feature Information Pre-requisites For Configuring AP Manager Interfaces Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 6
Information About Interface Groups Creating Interface Groups Adding a VLAN Group to a WLAN Configuring the Trunk Port Configuring VLAN Interfaces (GUI) Feature History and Information For Configuring Interface Groups Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
A vertical line, called a pipe, indicates a choice within a set of keywords or arguments. [x | y] Optional alternative keywords are grouped in brackets and separated by vertical bars. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 8
Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) viii OL-32314-01...
Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html...
Page 10
Preface Obtaining Documentation and Submitting a Service Request Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Command Modes The Cisco IOS user interface is divided into many different modes. The commands available to you depend on which mode you are currently in. Enter a question mark (?) at the system prompt to obtain a list of commands available for each command mode.
Page 12
VLAN While in global Controller(config-vlan)# configuration configuration mode, enter the vlan vlan-id command. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
You need to enter only enough characters for the controller to recognize the command as unique. This example shows how to enter the show configuration privileged EXEC command in an abbreviated form: Controller# show conf Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
<Tab> Completes a partial command name. Example: Controller# sh conf<tab> Controller# show configuration Step 4 Lists all commands available for a particular command mode. Example: Controller> ? Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Changes the number of command lines that the controller records during the current terminal session in privileged EXEC mode. You can configure the size from 0 to 256. Example: Controller# terminal history size 200 Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
The command history feature is automatically enabled. You can disable it for the current terminal session or for the command line. This procedure is optional. SUMMARY STEPS 1. terminal no history Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
The keystrokes help you to edit the command lines. These keystrokes are optional. The arrow keys function only on ANSI-compatible terminals such as VT100s. Note Table 3: Editing Commands Editing Commands Description Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 19
You can use the Return and Space bar keystrokes whenever you see the More prompt. Space bar Scrolls down one screen. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
The dollar sign ($) appears at the end of the line to show that the line Example: has been scrolled to the right. Controller(config)# access-list 101 permit tcp 10.15.22.25 255.255.255.0 10.15.2$ Step 3 Return key Execute the commands. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Telnet session, but your controller must first be configured for this type of access. You can use one of these methods to establish a connection with the controller: Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 22
After you connect through the console port, through the Ethernet management port, through a Telnet session or through an SSH session, the user EXEC prompt appears on the management station. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
• Mozilla Firefox, version 30 or later • Safari, version 6.1 Information About Using The Web GUI A web browser, or graphical user interface (GUI), is built into each controller. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
• Displays all radio and AP join statistics. • Displays air quality on access points. • Displays list of all Cisco Discovery Protocol (CDP) neighbors on all interfaces and the CDP traffic information. • Displays all rogue access points based on their classification-friendly, malicious, ad hoc, classified, and unclassified.
The administrative username and password that you created in the configuration wizard are case sensitive. The Note default username is admin, and the default password is cisco. The Accessing page appears. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
By default, the username is admin and the password is cisco. You can use both HTTP and HTTPS when using the service port interface. HTTPS is enabled by default and HTTP can also be enabled. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 27
Password and Confirm Password text boxes. Click Next. The default username is admin and the default password is cisco. You can also create a new administrator user for the controller. You can enter up to 24 ASCII characters for username and password.
Page 28
The 802.11 Configuration page appears. Step 12 In the 802.11 Configuration page, check either one or both 802.11a/n/ac and 802.11b/g/n check boxes to enable the 802.11 radios, and click Next. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 29
You can save the controller configuration created using the wizard only if a success message is displayed for all the wizards. If the Save Wizard page displays errors, you must recreate the wizard for initial configuration of the controller. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 30
Using the Web Graphical User Interface Configuring the Controller Web GUI Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
In a switch stack, the VLAN database is downloaded to all switches in a stack, and all switches in the stack build the same VLAN database. The running configuration and the saved configuration are the same for all switches in a stack. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
VMPS server. You can also configure an access port with an attached Cisco IP Phone to use one VLAN for voice traffic and another VLAN for data traffic from a device attached to the phone.
The IP Base image supports static routing and the Routing Information Protocol (RIP). For full Layer 3 Note routing or for fallback bridging, you must enable the IP Services image on the standalone controller, or the active controller. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Note enable the IP services feature set on the standalone switch or the active switch. For information about using the software activation feature to install a software license for a specific feature set, see the Cisco IOS Software Activation document.
• Port number—The interface number on the controller. The 10/100/1000 port numbers always begin at 1, starting with the far left port when facing the front of the controller, for example, gigabitethernet1/0/1 or gigabitethernet1/0/8. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
SVI, use the no interface vlan global configuration command. You cannot delete interface VLAN 1. When you create an SVI, it does not become active until it is associated with a physical Note port. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
This module lists the generic steps used to configure any interface on the controller. You must use the following steps to configure interfaces on the controller: Before You Begin • Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 42
Verify the status of the configured interface using the show interface detail management management. Enables you to view the status of the configured interface. Example: Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Adds a description (up to 240 characters) for an interface. Example: Controller(config-if)# description Connects to Marketing Step 5 Returns to privileged EXEC mode. Example: Controller(config-if)# end Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
(Optional) Configures a range of interfaces. Interfaces configured in a range must be the same type and must Note be configured with the same feature options. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
This information is communicated to other network servers through all dynamic routing protocols. The interface is not mentioned in any routing updates. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 48
{port-channel port-channel-number} Example: Controller(config)# interface gigabitethernet1/0/2 Step 4 shutdown Shuts down an interface. Example: Controller(config-if)# shutdown Step 5 no shutdown Restarts an interface. Example: Controller(config-if)# no shutdown Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
[interface-id] stats Displays the input and output packets by the switching path for the interface. show interfaces interface-id (Optional) Displays speed and duplex on the interface. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
You can view the wireless interfaces available in the controller by choosing Monitor > Controller > System > Wireless Interface. in the controller web UI. The following details of the wireless interface page are displayed. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
1. Choose Configuration > Controller > System > Interfaces > Port Summary. 2. Click on the port in the port summary table to view the details of the selected port. 3. Click Apply. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Select the interface to configure the AP management interface(s) and management interface. You can configure one management and one or multiple AP management interfaces in the controller using the web UI. Step 4 Click Apply. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Configuring Interfaces Feature History and Information For Configuring Interfaces Feature History and Information For Configuring Interfaces Command History Release Modification Cisco IOS XE 3.2SE This command was introduced. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 54
Configuring Interfaces Feature History and Information For Configuring Interfaces Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
Page 56
2 Configure the server group name by entering these commands: a aaa group server tacacs+ group-name b server name name 3 Configure authentication and authorization by entering these commands: a aaa authentication login method-list group server-group Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Pre-requisites for Configuring Management Interfaces The pre-requisites for configuring the management interfaces on the controller follow: • For Cisco 5700 Series Controllers in a non-link-aggregation (non-LAG) configuration, the management interface must be on a different VLAN than any dynamic AP-manager interface. Otherwise, the management interface cannot fail over to the port that the AP-manager is on.
Returns to EXEC mode. Step 5 show wireless interface summary Displays all the wireless interfaces in the controller. Configuring the Management Interface This module contains the following topics: Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Feature History and Information For Configuring Management Interfaces Feature History and Information For Configuring Management Interfaces Command History Release Modification Cisco IOS XE 3.2SE This command was introduced. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 60
Configuring Management Interfaces Feature History and Information For Configuring Management Interfaces Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
A controller configured with IPv6 does not support Dynamic AP-Manager. By default, the management interface acts like an AP-manager interface. Link Aggregation (LAG) is used for IPv6 AP load balancing. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
You can view the access point join interfaces configured in the controller using the following steps: SUMMARY STEPS 1. show ap summary 2. show ap name 3. show ap name apname config general 4. show wireless interface summary Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Displays all the wireless- management and AP manager interfaces in the controller. Feature History and Information For Configuring AP Manager Interfaces Command History Release Modification Cisco IOS XE 3.2SE This command was introduced. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
CPU, such as a RADIUS server, as it might cause asymmetric routing issues. • Wired clients cannot access management interface of the Cisco WLC 2500 series using the IP address of the AP Manager interface – when Dynamic AP Management is enabled on a dynamic VLAN.
Displays a summary of all the configured VLANs. Feature History and Information For Configuring Dynamic Interfaces Command History Release Modification Cisco IOS XE 3.2SE This command was introduced. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 68
Configuring Dynamic Interfaces Feature History and Information For Configuring Dynamic Interfaces Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
• Before implementing multiple AP-manager interfaces, you should consider how they would impact your controller’s port redundancy. • Only Cisco 5500 Series Controllers support the use of multiple AP-manager interfaces. • AP-manager interfaces do not need to be on the same VLAN or IP subnet, and they may or may not be on the same VLAN or IP subnet as the management interface.
Feature History and Information For Configuring Multiple AP Manager Interfaces Feature History and Information For Configuring Multiple AP Manager Interfaces Command History Release Modification Cisco IOS XE 3.2SE This command was introduced. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 72
Configuring Multiple AP Manager Interfaces Feature History and Information For Configuring Multiple AP Manager Interfaces Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
VLANs in a group is 128. Step 2 wlan wlanname 1 wlanname Enables the WLAN to map a VLAN group. Step 3 client vlan vlangrp1 Maps the VLAN group to the WLAN. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
This page displays all the VLANs and details of the VLANs in the controller. Step 2 Click the VLAN ID field in the table to view the details of the selected VLAN. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
To delete a VLAN, check the check box in the VLAN summary page, and click Remove. Feature History and Information For Configuring Interface Groups Command History Release Modification Cisco IOS XE 3.2SE This command was introduced. Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 78
Configuring Interface Groups Feature History and Information For Configuring Interface Groups Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01...
Page 79
I N D E X AP-manager interface Interface groups 52, 56 and dynamic interfaces described management interface described dynamic AP-manager interface Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32314-01 IN-1...
Page 80
Index Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) IN-2 OL-32314-01...