Configuring Wireless Interface (Gui) - Cisco WLC 5700 Series Interface Configuration Manual

Configuring Wireless Interface (GUI)

DETAILED STEPS
Step 1 Choose Configuration > Controller > System > Interfaces > Port Summary.
Displays all the ports and details of the ports in the controller.
Step 2 Click on the port in the port summary table to view the details of the selected port.
The Edit Port details page appears. To edit the values listed in the page, enter values for the parameters listed in the Edit
page.
You must configure the selected port as a Layer2 or Layer3 interface.
Note
Step 3 Click Apply.
Configuring Wireless Interface (GUI)
You can configure wireless interface the in controller using the web user interface (GUI). To do this, you
must follow the steps defined in this module in the GUI.
SUMMARY STEPS
1. Choose Configuration > Controller > System > Interfaces > Wireless Summary.
2. Click New.
3. Select the interface to configure the AP management interface(s) and management interface.
4. Click Apply.
DETAILED STEPS
Step 1 Choose Configuration > Controller > System > Interfaces > Wireless Summary.
Displays all the wireless interfaces and details of the interfaces in the controller.
Step 2 Click New.
The New page appears.
Step 3
Select the interface to configure the AP management interface(s) and management interface.
You can configure one management and one or multiple AP management interfaces in the controller using the web UI.
Step 4 Click Apply.
Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
42
Configuring Interfaces
OL-32314-01